FEATURES

 - Latest microcontroller technology with watchdog feature for fail safe operation.
 - Second, Minute, Hour range with 0.01 to 1 Resolution programmable by user.
 - Delay OFF, Delay ON, Pulse output Programmable with pulse duration.
 - Four digit cycle counter with indication of completed cycle number.
 - Power on three condition ‘Stop/ Reset / Resume’ programmable by user.
 - Reset facility from front side as well as from Rear terminal.
 - Hold / Resume facility from front side.
 - Isolated RS - 485 serial port with MODBUS RTU Protocol output for PC interface.

Reset (IP1)
Start (IP2)
Hold
Range




Resolution
Accuracy
Time base
Display
Setting
Count Mode
Relay Action
Relay Output
Sensor Supply
Supply
Mounting
Dimension
Cutout
Cabinet
Terminal
Optional

Weight

 Manual Reset by pressing key OR Remote Reset from back side terminal i.e. short IP1 with +V Terminal.
 To start the time totalizer function i.e. short IP2 with +V on rear terminal
 Manually press key for one second till display flashing "HoLd". To release Hold, press again key then ‘rESUn’
 will come on display indicating hold is released.
 Second/ Minute/ Hour range from 1-999999 (6 digit) programmable by users.
 Minute - Second range from 0000.01 to 9999.59.
 Hour - Minute range from 0000.01 to 9999.59.
 Hour - Minute- Second range from 00.00.01 to 99.59.59.
 1,0.1,0.01 (programmable) for Sec / Min / Hour.
 Better than 0.1%
 11.059 MHz quartz crystal time base.
 6 digits L.E.D display for Time Totalizer function., 8 L.E.D.’s for RL1 , RL2, TX, RX, SET, HOLD, INPUT & CLK
By 3 membrane keys on front panel i.e. Keys.
Count Up / Count Down user selectable.
Normally ON, Normally OFF, Pulse output with relay ON / OFF time from 0 to 999.9 second.
1NO/C/NC relay potential free contact rated 250VAC / 5Amp for RL1 & RL2.
+12 VDC, 50mA supply for proximity, infrared sensor, buzzer etc.
230 V AC A10% 50 Hz OR 110 V AC A10% 50 Hz OR 24VDC.
Panel mounting / Wall mounting for Flameproof model.
96 (W) X 48(H) X 120(D) in mm. OR 72 (W) X 72(H) X 120(D) in mm.
92(W) X 44(H) in mm. OR 68(W) X68(H) in mm.
Cabinet : ABS Plastic
‘L’ type connector for ‘Y’ type Lugs.
1) Isolated RS485 Serial port with MODBUS RTU Protocol output for PC interface. Powerful SCADA Software is available.
2) Flameproof version is available on request for hazardous application.
1Kg. / 1.5Kg (Aprox.)