FEATURES

 - Used latest microcontroller based technology.
 - SECOND, MINUTE & HOUR range programmable by users.
 - 0.01, 0.1, 1 count resolution programmable by users.
 - Count up & count down mode programmable by users.
 - Two Independent setting with relay output.
 - 2 Nos. L.E.D. used for RL1 & RL2 ON indication.
 - 11.0592 MHz quartz crystal for high accuracy 0.3%.
 - Built-in watch-dog circuit for fail safe operation.
 - Remote & manual front panel reset & hold facility.
 - Program setting by three soft membrane keys on the front panel.
 - +12VDC / 50mA built-in supply for proximity, infrared sensor.
 - 1NO / C / NC relay contact rated 230VAC / 5AMP. For each setpoint.
 - Power fail three conditions programmable by users.
 - Three different DIN sizes are available.
 - Optional flameproof model is available on request.

 Display
 Range
 Accuracy
 Resolution
 Output
 Supply
 Time Base
 Setting
 Relay action
 Dimension
 Cutout
 Cabinet
 Mounting
 Terminal
 Count mode
 Built in
 Optional

 5 Digits of 13.0mm. height 7 segment red colour L.E.D display 2 no. red L.E.D for relay ON Indication.
 0-9999 (4digit) Second , Minute, Hour range, programmable by users.
 Better then 0.2%
 0.01, 0.1, 1 (Programmable by users) for all above 3 ranges.
 1NO / C / NC Relay potential free contact rated 6A at 230VAC for both the Relay 1 & Relay 2.
 230 VAC + 10% 50Hz OR 110V AC + 10% 50Hz. OR 24VDC
 11.0592 MHz Quartz crystal time base.
 3 membrane keys on front panel ‘-’ , ‘+’ , SET.
 Delay OFF, Delay ON, Pulse Output 0 to 999.9 second programmable by users.
 96(W) X 48(H) X 120(D) mm, 96(W) X 96(H) X 120(D) mm.
 92(W) X 44(H) in mm, 92(W) X 92(H) in mm.
 ABS Plastic, Black / White colour.
 Panel Mounting / wall mounting for flameproof model.
 18Nos. ‘L’ type connector for ‘Y’ type lugs.
 Count up & Count down programmable by users.
 For 12VDC, 50mA built in supply for proximity, Infrared, Sensor & buzzer O/P.
 Flameproof model is also available on request.