TC - 405 :
   PROGRAMMABLE AUTOCLAVE CONTROLLER

programmable autoclave controller

    FEATURES

 - INPUT: PT - 100 (3Wire)
 - Range : 0 to 140ºC
 - Very high accuracy 0.25%, With software linearization
 - Easy online field calibration by easy software
 - Temperature sensor break or (OPEN) indication. Under range & over range indication
 - Alarm-1, Alarm-2 two independent set point
 - Built-in OC to OF conversion for temperature
 - Built-in watch dog circuit for fail safe operation
 - Three different industrial sizes are available on request
 - Program setting by three soft membrane keys on the front panel
 - Relay output for each set point with NO/C/NC output
 - 2Nos. L.E.D used for alarm1 & alarm2
 - Very compact in size, easy to handle & install

 Display
 Input
 Range
 Resolution
 Time Base
 Set Point
 Setting
 Output
 Supply
 Dimension
 Cabinet
 Mounting
 Terminals
 Hysterisis
 Soak Time
 Buzzer alarm

 5 digit of 13.0 m.m. digit height L.E.D. display.
 RTD (PT-100)
 RTD - 0 to 140 oC
 0.1
 11.0592 MHz Quartz Crystal Time Base.
 2 Independent set point.
 By 3 keys on front panel i.e. (+) & (-) (SET) Keys.
 1NO /C /NC Relay contact rated 230VAC / 6A for the Relay1 & Relay2.
 230V A.C. K10% 50Hz (or) 110 Volt K10% 50Hz.
 96(W) X 48(H) X 120(D) in mm, 96(W) X 96(H) X 120(D) in mm, Cutout : 92(W) X 44(H) in mm, 92(W) X 92(H) in mm.
 ABS Plastic, Black or White colour.
 Panel Mounting.
 18Nos. ‘L’ type connector for ‘Y’ type lugs.
 0 to 99 Programmable.
 0 - 999Seconds
 When complete the soak time