TC - 404 :
   PROGRAMMABLE CONTROLLER

programmable controller

   FEATURES
 - INPUT: RTD - 0 - 400OC(maximum), Programmable range : - 4 - 20mA, 0 - 10VDC, 0 - 75mV
 - Very high accuracy 0.3%, With software linearization.
 - Easy online field calibration by easy software.
 - Temperature sensor break or (OPEN) indication. Under range & over range indication.
 - Alarm-1, Alarm-2 two independent set point.
 - Built-in watch dog circuit for fail safe operation.
 - Three different industrial sizes are available on request.
 - Program setting by three soft membrane keys on the front panel.
 - Relay output for each set point with NO/C/NC output.
 - 2Nos. L.E.D used for alarm1 & alarm2.
 - Very compact in size, easy to handle & install.

 Display
 Input
 Range
 Resolution
 Time Base
 Set Point
 Setting
 Output
 Supply
 Dimension
 Cutout
 Cabinet
 Mounting
 Terminals
 Proportional
 Hysterisis
 Band Integral Time

 5 digit of 13.0 m.m. digit height L.E.D. display.
 Available for RTD, 4 - 20 mA, 0 - 10VDC, 0 - 75mV.
 RTD - 0 to 400 oC, J Type, K type Thermocouple, Programmable range :- 4 - 20mA, 0 - 10VDC, 0 - 75mV
 1, 0.1, 0.01 (Programmable)
 11.0592 MHz Quartz Crystal Time Base.
 2 Independent set point.
 By 3 keys on front panel i.e. (+), (-) & (SET) Keys.
 1NO /C /NC Relay contact rated 230VAC / 6A for the Relay1 & Relay2.
 230V A.C. K10% 50Hz (or) 110 Volt K10% 50Hz.
 72(W) X 72(H) X 120(D) in mm., 96(W) X 48(H) X 120(D) in mm. , 96(W) X 96(H) X 120(D) in mm.
 68(W) X 68(H) in mm., 92(W) X 44(H) in mm., 92(W) X 92(H) in mm.
 ABS Plastic, Black or White colour.
 Panel Mounting.
 18Nos. ‘L’ type connector for ‘Y’ type lugs.
 0 to 20.
 0 to 99
 0 to 99 Minute