FEATURES

 - Fail Safe Operation Design
 - Continues Gas Monitoring And Alarm System
 - Modular Design Card With Individual Display For Each Sensor
 - Easily Expandable & Easy For Maintenance
 - Individual Alarm Relay Outputs For Each Sensor
 - Range, Resolution, Control Action, Latch Facility Programmable By Users
 - Inhibit / Service Mode, At The Time Of Maintenance Alarm Relay Become Inactive
 - Easy Software Calibration - No Trim Pots
 - Optional Programmable linear 4 - 20mA O/P With Respect To Gas Concentration
 - Optional RS-485, With MODBUS RTU Protocol

   APPLICATIONS

 - Oil & Gas Industries
 - Chemical & Petrochemical Plants
 - Chemical Processing Plant
 - Pulp & Paper Plants
 - Acid Alkalizes & Dyes Mfg. Plants
 - Offshore Drilling & Processing
 - Platforms
 - Refineries
 - Stack Monitoring
 - Chemical Storage Area
 - Ambient Monitoring
 - Sewage Plants
 - Fertilizers Plants
 - Power & Industrial Plants
 - Gas Metering Station
 - Bullet Yard / Storage Yard
 - Coal Mine and Confined Area
 - Gas Pipeline Project
 - Gas Cylinder Bank
 - Heat Treatment Plants
 - Automotive Industries / Paint Shops
 - Burner / Furnace Areas

 Input
 Range
 Resolution
 Accuracy
 No. of Input cards
 Display
 LED Indication
 
 Set point
 Relay Output
 Relay Latching
 Setting
 Monitoring
 Supply Voltage
 Cable
 Operating Temperature
 Cabinet Material
 Terminal
 Dimension
 
 
 
 
 
 
 
 
 Mounting
 Optional 

4 to 20mA output from Oxygen / Toxic / Combustible Gas Transmitters
0 to 999 programmable by user, reads % L.E.L., P.P.M. OR % VOL.
0.1, 1 programmable by user
± 1 % of the full scale value
Max. 16 module cards (Optional available 24 nos. and 48 nos. depends upon panel size )
3 Digits of 8mm (H) Red LED display for Gas Concentration
5 No, AL1for Relay-1 & AL2 for Relay-2, FLT for Fault Indication, PWR for Power, INT for Service / Inhibit mode,
Optional TX for Transmitting signal & RX for Receiving signal
2 Independent Alarm set point programmable by user
3 NO, 1 NO/C/NC relay contact rated 230VAC / 5A for Alarm Relay-1 & Alarm Relay-2 and Fault relay
Programmable latch facility for Alarm Relay-1 & Alarm Relay-2 Indication
Setting by 4 keys on front panel ‘MODE’, ‘SHIFT’, ‘INC’, ‘ENT / ACK’
Sensor break/ open shows ‘oPn’, under range shows ‘Und’ & over range shows ‘our’
18 to 36 VDC, 24 VDC normal for module card OR 230V AC ± 10% for wall mounted panel
1.5 sq. mm 3 Core OR 2 Core, Flexible OR Armoured shielded cable from Gas transmitter
0 to 50oC ± 5%, Relative Humidity: Below 95% non Condensing
Aluminum housing with powder coating
20 connectors with 1.5 Sq. mm. Wire connection facility for each channel

Panel mounting / Wall mounting
a) Isolated RS-485 Serial port with MODBUS RTU Protocol output for PC interface
b) Isolated 4-20mA retransmission output for PLC, DCS, any recorder
c) SMARTLOG / SCADA SOFTWARE for online graph & data report for safety Audit or real time graph,
    history data, alarm report
d) Flame Proof or Non Flame Proof Industrial Hooter, Hooter cum Flasher, Chart recorder, Cables, PC Software,
    Gas Transmitters, 24 VDC power supply, Gas calibration kit