FTC - 100 :
   PROGRAMMABLE FLOW TOTALIZER

PROGRAMMABLE FLOW TOTALIZER

FEATURES

 - Based on state of art latest microcontroller technology with Watchdog feature for fail safe operation
 - Acceptability of various analog inputs from Flow Transmitter
 - A high resolution of 20000 counts (max) for Flow rate & 999999 counts (max) for Flow totalizer & Batch counter.
 - Highly informative, user friendly display & keyboard interface with indication for Flow rate, Total & Batch
 - Relay control action can be programmable.
 - Programmable latch OR non-latch facility for relay & relay indication.
 - User selectable batch quantity, batch counter & reset facility through keyboard & external contacts
 - Non-Volatile battery backup memory to store data in case of power failure with configurable power up recovery option.
 - Isolated RS485 communication with MODBUS RTU Protocol
 - Isolated retransmission of process value signal (Optional).
 - Configurable retransmission range setting by users.
 - Square root extraction facility.
 - Flameproof version is available on request

Analog Input from
Flow Transmitter
Sensor Break
Range


Resolution
Accuracy
Setting
Alarm Output

Relay Specification
Control Action

Display

Square Root
Memory


Reset

Supply
Mounting
Dimension
Cutout
Cabinet
Optional



Weight

 1) Current 0-20mA / 4-20mA field selectable
 2) 0-1V / 0-1K W input OR 0-10KHz 5VDC square wave pulses.
 Under Range ‘UndEr’, Over range ‘ouEr’, ‘oPEn’ indication for 4-20mA .
 0 to 20000 (5 digit) counts of Flow rate configurable as per Second, Min, Hour.
 0 to 999999 (6 digit) counts of Flow totalizer.
 0 to 999999 (6 digit) Batch counter to know total no. of Batch completed
 Field programmable decimal point selection for Flow Indication by users.
 Better than 0.1% of full scale reading.
 By 3 keys on front panel i.e. Keys.
 2 Independent set points for Totalizer setting.
 2 independent NO/C/NC contact for Flow total indication.
 5Amp. / 250VAC, 5Amp. / 30VDC at resistive load.
 L & H, H & VH, L & VL control action facility individual for each relay.
 Auto reset pulse output for Batch application.
 5 Digit for Flow rate OR 6 Digit for Totalizer, selectable by using (+) key on Front panel.
 8 L.E.D.’s for RL1, RL2, TX, RX, PROG., SQR, RATE & TOTAL .
 Square root extraction facility.
 Non-Volatile memory to store the totalizer value, Batch count in case of
 power failure with 4 options of power up recovery i.e. No memory recovery,
 Batch memory recovery, Totalizer memory recovery & All memory recovery.
 Provision for Total reset from the panel as well as remote reset from back
 terminal through potential free contacts input for Totalizer.
 230VAC ±10% OR 110VAC ±10% OR 24VDC.
 Panel mounting / Wall mounting for flameproof model.
 96(W) X 48(H) X 120(D) in mm. OR 72(W) X 72(H) X 120(D) in mm ( Including back side connecter )
 92(W) X 44(H) in mm. OR 68(W) X 68(H) in mm.
 ABS Plastic, Black Color for [96(W)X48(H)X120(D)] & White Color for [72(W)X72(H)X120(D)]
 a) Isolated RS485 Serial port with MODBUS RTU Protcol output for PC interface.
 b) Isolated 4 to 20mA retransmission programmable output for recorder or PLC proportional to selective range.
 c) Flameproof version is available on request for hazardous application.
 Important : MODBUS RTU Protocol support to update instrument setting through PC. Powerful SCADA software is available.
 1 Kg.