TC - 1600 : DATA SCANNER / DATA LOGGER

TC - 1600 Panel Mounting

TC - 1600 Weatherproof

TC - 1600 - flameproof

FEATURES

 - Used latest micro controller based technology for better accuracy
 - 16 Channel fixed input for all thermocouple, J, K, R, S, T, E, B, N
   programmable by users, and Fixed Inputs for RTD
   (PT-100/CU53), 4-20mA, 0 - 10 VDC factory settable
 - Easy on-line field calibration by front panel membrane keypad
 - Field programmable channel scan time 1 to 59 sec.,
   Logging interval 1 to 9999 sec & Printing Interval 5 to 9999 sec.
 - Field programmable Delay time 1 to 99 sec. for Relay Output
 - Optional RS-232 / RS-485 Modbus Serial Port
 - Optional Parallel / USB Printing Port

APPLICATIONS

 - ISO Certification records, Validation process certifying
 - Pharmaceutical process validation with graph & excel report in
   Autoclaves
 - Online profile recording for Oven & BOD, Incubator, Humidity     Chamber
 - Winding temperature of generators, Bearings, motors, transformers
 - To know heat Profile in furnace, foundries for Heat treatment     application
 - Primary & auxiliary temperature scanning of boiler
 - Chemical & Hazardous area where data monitoring is essential
 - Room Mapping in Pharmaceutical

Input












 Display

 L.E.D. Indication
 Set Point

 Control action
 Relay Output
 Setting
 Scan Time
 Print Interval
 Logging Interval
 Memory
 
 Monitoring Sensor
 Open / Under / Over
 Supply Voltage
 Operating Temperature
 Enclosure Details
 Protection Class
 Cabinet Material
 Cable Entry

 Dimension
 Cutout
 Mounting
 Weight
 Optional

 5 digits of 13 mm Height Red L.E.D display for ‘Process Value’ indication
 2 digit of 13 mm Height Red L.E.D display for ‘Channel Number’ indication
 32 Nos Red L.E.Ds of 3 mm for Alarm Indications Al1 & AL 2 Individual for each channel
 2 independent set points for each channel with 4 common relay outputs &
 programmable latch / non-latch facility for 4 common relays & Alarm indications
 HI - LO, LO - Very LO, HI-Very HI; programmable by user
 1 NO/C/NC Relay Contact Rated 230VAC/5A for four Relay
 Setting by 8 keys on front panel ‘MODE’, ‘SHIFT’, ‘INC’, ‘ENT’, ‘PRN’, ‘ACK’, ‘ESC’, ‘HOLD’
 1 to 59 sec scan/scroll time between each channel; programmable by user
 (Optional) 5 to 9999 Sec for Direct print out on 24 / 80 / 132 Column Dot matrix Printer
 1 to 9999 Sec loggin interval in data logger model; programmable by user
 Max. 3000 readings storing capacity for all 16 channel in Data Logger model
 Memory saturation, Memory Scrolling (FIFO) & Online PC Interface available in Data Logger model
 Temperature sensor ‘Break / Open’ display shows ‘oPEn’ indication
 Under range ‘undr’. Over range ‘OuEr’ indication for RTD & all Thermocouple I/Ps
 230 VAC ±10%, OR 110 VAC ±10% OR 24 VDC OR 12 VDC
 -40 To 85 oC Relative Humidity : Below 95% non condensing
 PANEL MOUNTING (PM)              WEATHERPROOF (WP)                         FLAMEPROOF (FLP)
 IP - 40                                          IP- 65                                                     IP - 65, CMRI for IIA & IIB Gas Group
 MS, Aluminium powder coated    Polycarbonate,Gray colour                    Cast Aluminum alloy, LM-6 / C.I. Enclosure
 Terminal connector                     Thermoplastic cable gland (IP - 68)        Double compression cable gland
 for connection                                                                                             (Ex-Proof)¾” ET- type
 192(H) X 96(W) X 200(D) in mm   305 (H) X 325 (W) X 170 (D) in mm        450 (H) X 390 (W) X 170 (D) in mm
 188(H) X 92 (W) in mm                 - - - - -                                                     - - - - -
 Panel mounting                           Wall Mounting / Stand Mounting           Wall Mounting / Stand Mounting
 Approx. 1.5 Kg                             Approx. 3.5 Kg                                       Approx. 15 Kg
 a) Isolated RS-232 / RS-485 Serial Port with MODBUS RTU Protocol output
 b) Isolated Parallel port for direct printout on 24/80/132 column Dot Matrix printer without need of Computer (PC)
 c) SMARTLOG / DATALOG / SCADA Data Acquisition Softwares for online graphs & history data reports
 d) Individual Relay output or Grouping Relay output can be given for each channel