FEATURES

 - Auto resolution R.P.S. or R.P.M.
 - R.P.S. (Revolution per second or pulse per second) or R.P.M. (Revolution per minute or pulse per minute) user selectable.
 - 2 Nos. LED used for RL1(Alarm1) & RL2, (Alarm2).
 - 11.059 MHz quartz crystal for high accuracy.
 - Two independent set points programmable in 3 different control actions, Like normally ON, normally OFF, pulse output.
 - Built-in watch-dog circuit for fail safe operation.
 - Relay output for each set point with NO / C / NC output.
 - +12VDC, 50mA built in supply for proximity, Infrared sensor.
 - Program setting by three soft membrane keys on the front panel.
 - Three different industrial sizes are available on request.
 - Remote & manual reset facility.

 Display
 Range
 Accuracy
 Output
 Resolution
 Time Base
 Set point
 Relay action
 Sensor supply
Terminals
Multiplier
Count Mode
Reset
 Dimension
Cutout
 Cabinet
 Mounting
Application

 5 digit of 13.0mm. height 7 segment red colour bright L.E.D display.
 0-9999 count, 5 digit / 0-99999, 5 digit is also available on request.
 Absolute.
 1NO / C rated 6A at 230VAC.
 Auto resolution.
 11.059 MHz Quart crystal time base.
 2 Independent set point setting via front panel key pad.
 Delay OFF, Delay ON, Pulse output (Programmable).
 +12Volt with 50mA capacity to operate proximity, Infrared, Switches etc.
 16No. PBT Connector for 2.5Sq.mm. Pin type lugs or 2.5 Sq.mm. wire.
 From 0.001 to 9999. Scale factor facility.
 Count Up, Count Down, (Programmable).
 Manual by pressing (-) keys or Remote (Reset) from back side connector.
 72(W) X 72(H) X 120(D) in mm., 96(W) X 48(H) X 120(D) in mm. , 96(W) X 96(H) X 120(D) in mm.
 68(W) X 68(H) in mm., 92(W) X 44(H) in mm., 92(W) X 92(H) in mm.
 ABS Plastic, Black/White colour.
 Panel Mounting.
 Counting number of pieces, batch counter, pieces count of cloths, cables, wires, ropes, sheets etc.